67
ESPAÑOL
66
ESPAÑOL
1
2
B
A
3
5. MONTAJE DEL CABLE Y AJUSTE
• Hay que realizar esta operación con la
cadena situada en el piñón más pequeño
de la rueda libre y con el pulsador del
mando Ergopower en el cero (Fig. 1).
• Enroscar al máximo el tornillo en sentido
orario (A - Fig. 2).
• Girar el tornillo (B - Fig. 2) hasta obtener
una perfecta alineación del eje de sime-
tría de la ruedecilla superior con el eje de
la primera corona (Fig. 3).
• Verificar la longitud y acortar eventualmente la funda, teniendo la precaución de cortarla
en ángulo recto, sin alterar su sección; una funda de longitud insuficiente dificulta el fun-
cionamiento del cambio. Las fundas y cables
no necesitan lubrificación
ya que se dis-
tribuyen pre-lubrificadas.
• Pasar el cable a través del tornillo regulador de tensión (C - Fig. 4) e introducir la extre-
midad de la funda, pasar el cable bajo la placa (E - Fig. 4) y fijarlo enroscando el tornillo
allen (D - Fig. 4). Cortar el cable en exceso aproximadamente a 2 cm del tornillo de fija-
ción y cubrir la extremidad con un tope.
Par de apriete: 6 N.m - 4,4 lb.ft
4
C
D
E
Llave Allen de 5 mm
6 N.m - 4,4 lb.ft
CERRAR
7225195 - Cambio 6-02-2002 12:17 Pagina 66