background image

6 - 

PERIODIC INSPECTIONS

Before each use or after falling or bumping into external elements, make sure none of 
the following problems are present:
• abnormal noise coming from the crankset
• play when pushing or pulling the crankset laterally
• cracks or damage on the hand cranks
• bottom bracket cups not in the correct position
• chainrings with worn/damaged teeth  
• chainring blocking screws damaged/not in position

Also make sure that the chain does not have any problems (oxidised, worn, damaged 
or jammed links). 
If you find one or more of these problems or if you have doubts about the correct 
operation of the crankset, contact specialised personnel as indicated in the assembly/
disassembly chapter.

WARNING!

Campagnolo spare parts must only be installed by qualified personnel with spe-

cialised knowledge, suitable tools and sufficient experience and who carefully 

follow the installation instructions. Failure to comply with the above could result 

in product malfunctions, accidents, physical injury or death.

ENGLISH

30

ENGLISH

31

The threaded holes for the pedals located 
on the hand crank are type 9/16’’ x 20 TPI.
The thread of the left hand crank is left-
handed (Fig. 2), therefore turn the pivot 
of the pedal anticlockwise to fit the pedal, 
whereas the thread of the right hand crank 
is right-handed (Fig. 3), therefore turn the 
pivot of the pedal clockwise to fit the pedal.
Observe the tightening torque indicated by 
the pedal manufacturer.

The chainrings of the crankset can be repla-
ced by selecting combinations of chainrings 
that differ from the original. The availa-
ble Campagnolo chainring pairs are: 50-34, 
52-36, 53-39.
Contact your local mechanic to have the 
chainrings replaced. For maximum com-
patibility and efficiency, use only original 
Campagnolo components.

2

3

Summary of Contents for 11 Speed










Reviews: