CAMPAGNOLA SL23, Use And Maintenance Manual

Page: 29 / 242

Use and maintenance manual
– Instructions
Original instructions Rev. : 02 Date 28/04/2023
Page 29
6.3 Troubleshooting
Type of alarm Number of
flashes on the
display
Number of beeps Type of error indi-
cated on the display
No problem 0 0 E00
Contact protection 1 1 E01
Current sensor error 2 6 E02
Damage to MOSFETs 3 6 E03
Hall / broken blade sensor 4 3 E04
Overcurrent / medium current peak protection 5 5 E05
Opening blocked / motor blocked 6 3 E06
Overload 7 4 E07
Undervoltage / overvoltage 8 1 E08
MOSFET overheating 9 6 E09
PWM communication/voltage error 10 2 E10
Battery error 10 7 E10
EEPROM error 11 6 E11
Phase detection error 12 4 E12
Programming error 13 6 E13
Shear and battery are not compatible 16 9 E16
The motherboard failed to communicate with the bat-
tery pack 17 10 E17
6.4 Extraordinary maintenance
CAUTION!
Any extraordinary maintenance (example: replacing the gearmotor unit or electronic boards) must be performed
at an Assistance Centre authorised by the Manufacturer.
The workshop authorised to carry out repairs on the
Manufacturer’s products.
6.5 Periodic maintenance schedule
MAINTENANCE ROUTINE
EXTRAORDI-
NARY
New blade
(Within the
first 15
minutes)
Every
hour
Every
day
After 100
hours (about
200,000
cuts)
Ever
y 90
days
At the end of each
working season / at
least once a year
Sharpen the cutting blade. X X X
Replace the cutting blade. X
Lubricate blades and pin with the manu-
facturer's recommended lubricant LUBE
SPRAY GREASE.
X
Rack cleaning and lubrication. X
Battery holding recharge. Necessary to
prevent battery from dropping below 10V
(no longer rechargeable).
X
General overhaul at Authorised Assis-
tance Centre.
X
AUTHORISED WORKSHOP