![background image](http://html.mh-extra.com/html/campagnola/holly/holly_use-and-maintenance-manual_488424019.webp)
Pag. 18
Use and maintenance manual – Translation of
original Instruction Rev.: 03, Date 10/09/2021
IMPORTANT!
For a correct and clear identification of the tool, reference must be made to type, serial number and year of construc-
tion shown on the identification plate. Mention them to Campagnola Srl for any request for intervention or assistance.
IMPORTANT!
The customer is responsible for verifying the integrity of the plate / label.
The user is required to replace the plate and / or the warning plates which, due to wear, have become illegible.
It is absolutely forbidden to remove the plates / labels from the machine / tool. Campagnola S.r.l. declines all
responsibility for the safety of the machine / tool if this prohibition is neglected.
Product description
The mechanical head is the top part of an electromechanical harvesting tool manufactured by CAMPAGNOLA S.r.l..
An electro-mechanical harvester is composed of three main parts, sold separately: the harvesting head, the extension
pole and the power unit. For more details, read the power unit manual.
There are various models of each of the three components, but all are compatible in order to make the operator create
the best solution for the task to be carried out. The mechanical head can be connected either to a fixed extension pole
(11) or to a long or medium telescopic one (12).
The various combinations are indicated in par. 2.1 of the power unit manual.
The tool harvesting head makes fruit fall down thanks to its rake (2) rotating movement among the branches.
The rake (2) is made of techno-polymer and fitted with teeth (1) of plastic material. It is extremely light and resistant and
makes a rotating movement.
The rake (2) movement is generated by a motor and is transmitted to the harvesting head by means of an extension
pole (11-12) (read the power unit manual).
The mechanical head includes the cinematic mechanism operating the rake movements, the rake (2) and its holder.
All information about the harvesting head and teeth (1) operating system can be found in the manual of the chosen
power unit.
WARNING!
Please remember that the tool has been manufactured only for the purposes described in this manual.
IMPORTANT!
The best battery autonomy performance is reached after the first 20 work hours
Parts supplied
- Use and maintenance manual.
Recommended use
The tool has been manufactured for olive and coffee beans harvesting, to be carried out according to the above-men-
tioned ways and limits.
WARNING!
•
Any other use has to be considered improper and potentially dangerous for the operators’ safety. This
would then make any warranty claim void.
•
If it is not used for the purposes it was manufactured for, the tool may get damaged and cause serious
injuries to personnel and bystanders and damages to things.
Tool composition
Pos.
Denomination
Function
1
Tooth
Moves among the branches to make fruit fall down
2
Complete rake
Moves among the branches to make fruit fall down.
3
Extension pole fixing clamp
Fixes the mechanical head onto the extension pole
4
Identification sticker
Shows the identification details
5
Clamp screws
Fix the clamp on the extension pole
6
Teeth holder fixing screws
Allow to lock the teeth holder onto the mechanical head
7
Teeth holder
Is the seat of the teeth
8
Oscillator
Creates the rotating movement of the mechanical head
9
Oscillating mass
Reduces the mechanical head vibrations
10
Oscillator drive
Guides the oscillator
11
Fixed extension pole
Holds the tool
12
Telescopic extension pole
Holds the tool
Summary of Contents for HOLLY
Page 2: ...9 2 1 7 5 3 4 6 6 Fig A 8 10 11 12 ...
Page 3: ......