Camp Chef SmokePro SG 24, Instruction Manual, Page: 7 / 32

Install Hopper Lid
1. Install hopper lid as shown in Fig. 6.
HOPPER LID (1)
M4 X 10 SCREW (2)
FIG. 6
Install Shelf Bracket
1. Install the bracket as shown in Fig 7.
2. Tighten all hardware.
M6 X 10 SCREW (4)
M6 FLANGE NUT (4)
UPPER GRATE BKT (2)
PG24SG-11
FIG. 7
Install Shelf
(Optional-Do not install if installing sear box)
1. Install shelf as shown in Fig 8.
2. Tighten all hardware
M6 HANDLE SCREW
HANDLE DEFLECTOR
M6 X 15 SCREW
GREASE BUCKET
ASH CUP
FIG. 8
Grease Bucket
1. Hang grease bucket from tube as shown in Fig 9.
Ash Cup
1. Install Ash Cup as shown in Fig 9. Never use grill without
Ash Cup in place.
ASH CUP
GREASE BUCKET
FIG. 9
Install Drip Tray
1. Install the Drip Tray as shown in Fig 10 and Fig 11.
DRIP TRAY
FIG. 10
DRIP TRAY
FIG. 11
Warming Rack and Cooking Grate
1. Install the cooking grate as shown in Fig 12.
UPPER GRATE (2)
PG24SG-5
LOWER GRATE (2)
PG24-70
FIG. 12
Clean-out Knob Assembly Installation
Hand tighten the burner clean-out knob as shown in Fig 13.
PG24-9 (1)
BURNER PULLOUT KNOB
Clean-out Port Knob
1. Clean-out Port knob must be pushed in when grill is on.
Make sure pullout lock is pushed down and locks the
knob to prevent inadvertent opening of the clean-out port.
See Fig 14.
2. Lift pullout lock and pull clean-out port knob to empty
ash into ash cup. See Fig 15
3. See instructions for burner clean-out.
FIG. 13