Camouflage EZ-Solar, Instructions Manual

Page: 32 / 36

- 31 -
8. TROUBLESHOOTING TIPS
1) The camera won’t power on.
Possible Cause

Batteries not fully installed, or not installed correctly.
Recommended Solution(s)

Install new AA alkaline batteries.

Make sure the positive (+) and negative (-) poles are lined up properly
in each compartment, with the (-) pole making contact with the spring.
2) The camera takes images without animals.
Possible Cause

A “false trigger” is caused by motion (branches, water, etc.) and/or high
heat in front of the camera lens when there is no subject in the image.
Recommended Solution(s)

Move the camera to a spot without branches or water close to the
camera.

Change PIR Sensitivity in menu settings.

Move the camera to an area without movement to check and see if it
still takes pictures without movement. Contact customer service for
possible repair or replacement.
3) The camera responds slowly to movement but does not
always capture an image when triggered.
Possible Cause

The PIR sensitivity setting needs to be adjusted.
Recommended Solution(s)

Go to “PIR Sensitivity” in the Setting Menu and increase the PIR
sensitivity
4) The battery life is shorter than expected.