2. Connect the power cable (red/black) to the control box and power source. This can be
between 10V & 30V D.C.
Positive terminal (+) = red colour
Negative terminal (-) = black colour
3. Connect the control box with the middle antenna cable socket.
Then connect one receiver (via the short coax cable) with the socket marked
"RECEIVER" on the back of the control box, the other receivers please connect with
the remaining sockets of the antenna directly.
4. Instead of the 3 receiver you can also connect a satellite multi switch to the antenna.
This enables you to use more than 3 receiver with the antenna (depending on outputs
of multi switch. Please pay attention that the multi switch is able to be connected
directly with "Quad LNB", not only "Quattro LNB".
3x Satellite-
receiver
3x Monitor or TV
with AV input
Receiver socket
Antenna socket (F)
Power socket
Control box (rear-view)
Control box
CAMOS CSA-450
