27
ADJUSTMENTS
Alignment
The parallelism must be adjusted with the ATV on the ground,
driving forward on about 3 m and measuring toe in
distance.(Refer to Figure 16).
NOTE: Every time the measurement has to be verified, drive in reverse,
then, drive forward again on about 3 m.
NOTE: Verify the condition of the components of the steering system
before adjusting the parallelism. Components damaged can
prevent a proper ajustment and impair a good operation of the
system
Figure 16
To perform adjustments on the ATV, first unlock the nut (1) of
each tie rod end on the ATV. Then screw or unscrew the rod link
(2) equally on both sides of the vehicle.
Figure 17
Summary of Contents for T4S
