Turbo 7 Log Splitter
Turbo7/0213
Page 17
Problem
Probable Cause
Corrective Action
Log fails to split
Incorrect positioning of the
log.
Position the log correctly.
Log exceeds permitted di-
mensions or the wood is too
hard for the capacity of the
machine.
Try to cut a small part or use
other means to reduce the
size of the log.
Wedge does not cut.
Sharped the wedge, check for
burrs or nicks, file ¡f neces-
sary.
Oil leak.
Locate the leack using a piece
of card or wood. Contact your
dealer.
Hydraulic pressure too low.
Contact your dealer.
Rod advances jerkily or with
strong vibrations
Air in the circuit.
Check oil level. Top up if
necessary. If problem persists
contact your dealer.
Oil leak from the rod or from
other external points
Leakage from the tank.
Check that the bleed screw
has been tightened.
Seals worn.
Contact your dealer.
Troubleshooting
Summary of Contents for Turbo 7
