SAVE THESE INSTRUCTIONS
OPERATING INSTRUCTIONS
Please read the following instructions before using your new Camon
Clipper. Give it the care that a fine precision built instrument deserves and
it will give you years of
service. Plug cord into
electrical outlet, 230
volt, 50 Hz and connect
it to the machine body
or to the single battery
pack. Let it charge for
3 hours.
Turn on the clipper
(1). Start clipping the
fur very slowly, while
following the hair
direction. Turn scale
(2) to adjust cutting length. Do not exert too much pressure on the blade
and on the pet’s body. Make sure frequently that the blade is not overheated.
REMOVING BLADE SET
To remove blade set, first make
sure your clipper motor is
switched off.
NOTE: hair may accumulate in the
front cavity of the housing under
the blade. If this happens, you can
clean out the hair by brushing out
2
1
ON
OFF