Camon C50i, Operating Instructions Manual, Page: 18 / 24

CAMON C50i Chipper Tracmaster Ltd
_______________________________________________________________________________________________
16
For parts diagrams visit www.tracmaster.co.uk
7.0 Transportation, Storage and Handling
7.1 Transportation
Use ramps where possible to manoeuvre the Chipper into a transportation vehicle.
The C50i must be fixed securely using straps and by placing chocks behind the wheels.
Always transport the C50i horizontally and not at an angle.
Ensure that the fuel control lever on the engine is moved into the OFF position so fuel does
not leak into the carburetor during transportation.
7.2 Storage
Always clean the machine and dry thoroughly prior to storage and ensure all lubrication
points have been re-greased.
For periods of long storage, change the engine oil.
Either drain the fuel completely or fill the fuel tank and add fuel stabilizer.
Do not store the Chipper in wet rooms, where fertiliser is stored, or in stables as heavy
corrosion may occur.
Always store the machine in a horizontal position.
7.3 Handling
Do not attempt to lift the machine alone. At least two people is the minimum required.
Gloves must be worn when lifting the C50i Chipper.
Do not tilt the machine so that fuel can leak into the air filter of the engine.
When performing maintenance on the Chipper when it is situated on a work bench, ensure
that the machine is firmly held in position at all times.
Do not lift the machine solely by the engine at any point.