Camon C50i, Operating Instructions Manual, Page: 14 / 24

CAMON C50i Chipper Tracmaster Ltd
_______________________________________________________________________________________________
12
For parts diagrams visit www.tracmaster.co.uk
6.0 Maintenance
6.1 Schedule
Operation Daily Every
Week Every
Month
Engine Check engine oil level 10w/30
See separate engine manual
X X
Machine Check condition of blades X
Check belt condition X
Check collection bag condition X
Check rotor shaft bearings X
Tighten all nuts and bolts X
6.2 Basic Maintenance
Check that all guards are fitted securely.
6.3 Advanced Maintenance
We strongly recommend that an Authorised Representative is consulted prior to any major
machine maintenance projects.
6.3.1 Belt
Inspection Check:
Check every 25 hours that the drive belt is not frayed or cracked. If it appears frayed
or cracked then it is time to replace the belt.
Changing the Belt:
Remove the belt guard from machine by removing the three bolts that hold it to the
chassis and the one bolt that connects it to the rotor housing.
Loosen the bolts that hold the engine to the chassis, allowing it to be moved freely
and to release the tension on the belt.
Remove the belt from the rotor disc pulley and
from the engine pulley.
Fit a new belt onto the rotor pulley and engine
pulley.
Tighten the belt by moving the engine in the
direction shown below and tightening the
engine chassis bolts to hold it in position.
Ensure that the rotor pulley and engine pulley
are in the same plane as indicted by the
dashed line on the diagram.