SAFETY
Normal Shutdown Procedure
In consideration of your own safety as well as that of others, you should always use the following normal shutdown
procedures before departing from the controls for any reason, including cleaning, servicing, transporting, or
inspecting the stump grinder. Never deviate from this procedure unless so instructed in this manual or an
emergency requires it.
1.
Move the engine throttle to the “SLOW” position.
2.
Release operator presence control.
A rotating cutting wheel is very DANGEROUS! Stand at controls and ensure that cutting wheel comes to a
complete stop before doing anything else.
3.
Set park brake before leaving controls.
4.
Turn the engine switch to the “OFF” position.
Emergency Shutdown Procedure
1.
Immediate release of the operator presence control will automatically shut off the engine.
2.
Be sure to allow all moving parts to come to a complete stop.
A rotating cutting wheel is very DANGEROUS! Stand at controls and ensure that cuttng wheel comes to a
complete stop before doing anything else.
3.
Correct the emergency situation, and return to normal operation.
C500 Stump Grinder
WARNING
!
WARNING
!
C500/0704/OP/8
