SAFETY
Before Starting the Engine
1.
Review all of the safety decals that are placed on the machine for your safety and convenience. See PARTS
section for aid in locating all decals on the machine.
2.
Make sure that all shields, guards, and curtains are in place, and are in good condition prior to operating the
machine.
3.
Only responsible, properly instructed individuals should operate this machine. Inexperienced operators
must always be carefully supervised.
4.
Check cutting wheel for damage or missing teeth, and replace as necessary.
5.
Make sure that no-one is working on, underneath, or close to the machine before starting the engine or
beginning to move the machine. Make sure that the area is free of personnel.
6.
Check stumps to be removed for embedded nails, wire, metal fence posts, and other metallic objects, and for
rocks or other buried impediments which may become dangerously thrown or cause unexpected machine
movements when hit by the cutting wheel.
7.
Ensure that everyone in the vicinty is aware of the
DANGER ZONE associated with this machine (see
diagram right). You and they must avoid the DANGER
ZONE at all times when the machine is in operation.
8.
Make no alterations or modifications to your CAMON
Stump Grinder unless requested or recommended by
Tracmaster Ltd.
9.
Check with the local utilities for the locations of buried
pipes and cables where applicable, before operating the
machine.
C500 Stump Grinder
DANGER
ZONE
KEEP
EVERYONE
OUT OF
THIS AREA!
C500/0704/OP/9
