Actiwave User Guide - Issue 2.0.18
Page 13
The drivers will be installed and the computer will then
tell the user that the new hardware is ready to use. If you
change the USB port that the reader is plugged into then
the driver may be automatically re-installed by Windows.
This is an automatic process and the user need take no
action.
2.5
Running the
Software for
the first time
The USB drivers must be installed before using the software
for the first time
.
Double clicking on the Actiwave icon on the desktop will
start the software. If a dock is plugged in it should be
detected and a view of it shown on screen. Three types of
interface dock are shown in the figures below:
Multi/Motion Dock
CombiDock
CardioDock
