7
Details on Video Record
BH-300
Details on Video Record
Normal Recording
Video Record starts when vehicle power is turned on and recorded data are stored in SD card.
Parking Mode Recording (Optional)
Parking mode recording is possibel with DC Fuse Power Cable (Optional). 10 sec. after parking or stopping the car, if no motion
is detected, it converts to Parking mode recording automatically. If any motion or shock is detected, it records automatically. Low
voltage protection and High temperature prevention function only excutes on Parking mode and possible to setup Low voltage
protection function on PC viewer.
EVENT Recording
If Acceleration sensor (G-Sensor) detects impact, sudden unintended acceleration and quick braking or manually pressing the Event
button during the car runs, it reords 20 sec. of video to the “EVENT” folder (10 sec. before and after the EVENT)
Manual Recording
In case of emergency, press Event Recording button shortly, then it records 20 sec. of video to the “EVENT” folder (10 sec. before
and after the EVENT).
Last Scene Recording
Though power supply is disconnected caused by accident or manually, last scene is recorded and stored in “EVENT” folder by using
TAT system.
Notice
The less G-Sensor figure, the less shock sensitivity. (Initial settings come with 3 level. 1 is insensitive, 3 is medium, 6 is sentitive)
TAT System is a format free system using time allocation table saving. Used as general-purpose video files (avi, mov, mp4) are
not stored in the form, checking the recorded file should be checked using a dedicated PC viewer. PC viewer can be downloaded at
www.blacksys.co.kr/eng .
Summary of Contents for BlackSys BH-300
Page 1: ...Real HD BH 300 BH 300...
Page 11: ...11 Name of Parts BH 300 Name of Parts GPS Event Button MicroSD Slot...
Page 23: ......
