PM 1000288 000 00
Device handbook SIRAX BT5100
15/32
7.1.3.3 RS 485 Parity Selection:
This screen allows the user to set Parity & number of stop bits of RS 485 port.
7.1.4. Output Type Selection
7.1.4.1 Output 1 Type selection
This screen allows the user to set the output 1 type as Voltage or Current.
7.1.4.2 Output 2 Type Selection
This screen allows the user to set the output 2 type as Voltage or Current.
ON
O/P1
O/P2
COM
ON
O/P1
O/P2
COM
ON
O/P1
O/P2
COM
ON
O/P1
O/P2
COM
ON
O/P1
O/P2
COM
O/P 1
O/P 1
O/P 2
Pressing the “
Down” key will enter the “Parity & stop bit edit” mode and scroll the value through
odd: odd parity with one stop bit
no. 1S: no parity with one stop bit
no. 2S: no parity with two stop bit
E: even parity with one stop bit
Pressing “
Up” key accepts the present value and advance to the Output Type selection (section 7.1.4).
RS 485 Parity confi rmation
Pressing “
Down” key will be re-enter into Parity Edit mode.
Pressing the “
Up” key will set the value and advance to the Output Type selection (section 7.1.4).
Pressing the “
Down” key will enter the “output 1type edit” mode and scroll between voltage and current.
Pressing “
Up” key will confi rm the present type for Output 1 and advance to the Output 2 type selection
(section 7.1.4.2).
Output 1 Type confi rmation
Pressing “
Down” key will re-enter into Output 1 type Edit mode.
Pressing the “
Up” key will set the type and advance to the Output 2 type selection (section 7.1.4.2).
Pressing the “
Down” key will enter the “output 2 type edit” mode and scroll between voltage and current.
Pressing “
Up” key accepts the present type for Output 2 and advance to the Input Parameter selection
(section 7.1.5).
