4
Safety Notice
•The users should read the operation manual carefully prior to operating the machine and must obey the
operating regulations strictly.
• The machine uses IV LASER (strong laser radiation)which type of laser radiation might make following
accidents:
1. Easy to burn combustible materials.
2. Different working materials might produce other radiations and toxic or harmful gases while laser en-
graving or cutting.
3. Laser radiation’s direct exposure will cause bodily harm.
•The location of the machine must be within view of fire extinguishing equipment to put out fires, which
are caused by cutting or engraving flammable materials. Do not leave the machine alone while cutting or
engraving, as it must be observed at all times while in operation. The operator should observe the machine
carefully while working and in case of emergency must cut off the power or press the emergency shut
off button.
•Ensure that processing material and emissions conform to local laws and regulations.
•The user should consider carefully whether the materials are suitable for laser cutting/ engraving for
safety.
•There are high voltage and other potential dangers in this machine. Please keep from those that who do
not operate or know of this machine.
• Keep the machine in a dry, non-pollution, non-concussing, non-electrically charged, non-strong mag-
netic field, etc. Environmental temperature should be 5-40℃, the environmental humidity should be from
5-95%(no condensed steam).
•Do not turn on the machine when the power supply voltage is unsteady or mismatched.
Please note, manufacturers won’t take any responsibility and liability because of improper use or disobe-
dience of all above regulations.
