background image

Chapter 4:Precautions and FAQ

PRECAUTIONS

Battery charging and maintenance

Hardware connection

Transmit speed

1.  a. Please recharge the CamFi for the first use or if it is left unused for a long time. 

The requirement for a charger is 5V/1A, and the usual charger for a mobile phone 
like an iPhone or iPad can also be used.

2. b.  The  working  temperature  for  the  CamFi  is  -20~50  Celsius  degree  and  the 

relatively  humidity  is  0%~95%.  Low  temperature  may  cause  degradation  to  the 
battery.

3. c. Charging your mobile phone through the CamFi is not recommended, as this will 

cause degradation to the battery.

4. d. Please keep CamFi from high temperature, moisture and water.
1.  1. It is strongly recommend that you use the provided USB cable of the camera to 

connect the CamFi. Low quality USB cables will cause unstable or poor connection 
and unexpected problems.

2. 2. You can use the lanyard in the accessories to hang the CamFi to the tripod or use 

the hot shoe screw to install the CamFi.

The transmission of the CamFi is the standard IEEE802.11bgn and the fastest speed 
is 150Mbps. The transmit distance is the same as a usual WiFi equipment. The actual 
transmit speed of the CamFi is dependent on the camera, wireless network environment 
and distance. You can take the following measures to improve the transmit speed.

1.  Turn off other Wi-Fi devices.
2. Remove the obstacles between CamFi and controlled terminals, especially those 

like metals and concrete.

3. Try to place the CamFi on a higher position.
4. Try to use the CamFi with a full battery. Low battery may cause the instability the 

transmission.

5. Try  to  use  the  original  USB  cables  provided  instead  of  other  compatible  USB 

cables.

17 

Summary of Contents for CF102























Reviews: