C-19
Scanner
®
2000 microEFM
Appendix C
Figure C.11—Removal of the fieldbus interface board
10. Disconnect the sensor ribbon cable from the J5 connector on the main board as follows:
a. Lift the latch from the black clip securing the ribbon cable (Figure C.12).
b. When the latch is fully open, the ribbon cable will release freely.
Figure C.12—Latch securing the ribbon cable
Summary of Contents for Scanner 2000 microEFM
Page 1: ...NUFLO Scanner 2000 microEFM Hardware User Manual Manual No 9A 30165023 Rev 10 ...
Page 26: ...26 Section 1 Scanner 2000 microEFM ...
Page 104: ...A 18 Appendix A Scanner 2000 microEFM ...
Page 106: ...B 2 Appendix B Scanner 2000 microEFM ...
