3
EXTERNAL SWITCH OPTION....
The external control switch option lets you
control the display of parameters on the
LCD and view daily logs without removing
the cover of the Scanner 2000 microEFM.
• Press and release the push-button to
view the next parameter in the LCD
window.
• Press and hold the push-button for
4 seconds to view the daily logs screen
(shown above). Then press and release
the push-button to view the next daily
log.
Up to 99 daily logs can be viewed from the
LCD using the keypad or external push-
button switch.
TO CONFIGURE THE INSTRUMENT....
Press the UP ARROW and ENTER buttons simultaneously to configure the following
• slave address
• baud rate
• date and time
To Enter a Port 1 Slave Address:
Enter the Configuration
menu.
Press UP ARROW (LOG) and
ENTER (SAVE) simultaneously.
+
00000000
...
00000000
...
00000000
...
00000000
...
Locate the Slave Address
setting.
PORT 1 SLAVE ADDRESS will
appear in the lower display, and the
right-most digit in the top display will
begin blinking.
Enter the Slave Address.
(range: 1 to 65535,
excluding 252 through
255 and 64764)
Press UP ARROW (LOG) until the
correct digit is displayed.
Press LEFT ARROW (DISPLAY) to
select the next digit to the left.
Repeat using UP ARROW (LOG)
and LEFT ARROW (DISPLAY) to
enter all remaining digits.
Press ENTER (SAVE).
Keypad Configuration & Controls
Remove the instrument cover to access the keypad. Each of the three keys are used for
configuration and operation.
The following illustration defines the functions of each key.
CONTROL THE PARAMETER DISPLAY...
Press the LEFT ARROW (DISPLAY) button to
manually advance the display of param-
eters in the LCD window.
VIEW DAILY FLOW LOGS....
Press the UP ARROW (LOG) button to
view daily logs. The two-digit log index
number to the left indicates the number
of days that have passed since the log was
recorded. A “1’” for example will display
yesterday’s log value; a “2” will display the
log value from 2 days ago. Up to 99 daily
logs can be viewed using the keypad.
TEST
ACCESS
CONFIGURATION:
Move between menus
and menu selections
OPERATION:
View next parameter
OPERATION:
View daily logs
CONFIGURATION:
Change digits and
other menu selections
CONFIGURATION:
Save configuration
settings
OPERATION:
Save totals
PRESS +
simultaneously to view
time/date, temperature,
and battery voltage
PRESS +
simultaneously to access
Configuration menu
Log index
(Days since log
was created)
Volume
Date stamp
(MMDDYY)
• contract hour
• plate size (if security
settings allow)
The following example demonstrates the steps
required to enter a slave address.