Power on your D-Link IP cameras. Your IP cameras are pre-configured to connect to the TP-Link
Wireless AP and automatically acquire an IP address via DHCP. It might take up to 1 minute.
When it is connected to the Internet, the D-Link Camera's power light will turn solid green.
Power on your tablet. You need to press and hold the power button until you see the device is
booting up, then release the power button. After it boots, it will automatically launch
CameraFTP VSS software. During the initial setup, you need to log on to VSS with your
CameraFTP username and password. The VSS software will then connect to the IP cameras and
display the live view windows.
Note:
VSS is responsible for encoding the video stream into H.264-based MP4 clips and upload them to the
cloud. You shall never turn off your tablet or quit VSS unless you really want to stop recording.
Summary of Contents for NVR-MT1003
Page 8: ......
