VC Camera Link series
Page 63 of 86
RA14-11A-010
9.3
Parameter Storage Space
The camera has 3 non-volatile storage space used for parameter storage and 1 volatile work space that is
applied to actual camera operation. 3 storage space is divided into Factory Space that contain basic value at the
factory, and 2 user space (User Space 1, User Space 2) that can save parameter value temporarily set by the
user. User space can be read and written, but Factory space can be read only.
At camera booting, setting value in one of 3 storage spaces is copied to work space according to Config
Initialization value and value of the space is used for camera setting. Since values in work space is valid only
while the power is on, it should be copied to user space 1 or user space 2 using the
“sct” command.
Volatile
Memory
(RAM)
Non_volatile
Memory
(ROM)
Work Space
User 1 Space
User 2 Space
Factory Space
Figure 9.2 Parameter Area
Summary of Contents for vieworks LVC-25MC2-30
Page 1: ......
