N10316;30/36
- 30 -
●
●
●
●
Change of camera settings
Change of camera settings
Change of camera settings
Change of camera settings
It is possible to display or change the current setting values by following procedure. The register is initialized by the setting value
which was saved on EEPROM when the camera was turned ON. If the latest setting values in the register is required to remain
valid even when the camera is turned ON next time, it is needed to save the setting values onto EEPROM.
■
Readout of setting values
It is possible to read the current setting values of the register from the camera and display them by the following procedure.
1)
Click “Read ALL” button at the bottom of the screen and read out the setting values of register and EEPROM from the
camera.
2)
The setting values acquired can be seen on the page displayed upon clicking the button at the top of the screen.
* It may happen that the picture image is distorted for a moment when “Read ALL ” is carried out. However it does not mean
abnormal state of the camera.
* When the camera is replaced or switched ON/OFF, be sure to reacquire the current setting values before changing register
settings.
■
Chang of settings values
It is possible to change the current settings by the following procedure.
1)
Click “Read ALL” button at the bottom of the screen and read out the setting values of register and EEPROM from the
camera.
2)
Click the button at the top of the screen and display the pages having the setting items that are needed to change.
3)
It is also possible to change the setting values by manipulating scroll bar and combo box.
* The entered values become effective upon having pressed [Enter] key. The following keys are also usable when the cursor
stays on the text box.
[ESC]: It discards the entered values to display the current values.
[↑] holding [Ctrl] down: It displays the maximum values.
[↓] holding [Ctrl] down: It displays the minimum values.
[↑] holding [Shift] down: It increases the value by 5.
[↓] holding [Shift] down: It decreases the value by 5.
[↑]: It increases the value by 1.
[↓]: It decreases the value by 1.
* The colors of the setting items change as follows.
Gray background. black text. no underline (Normal): Possible to change settings and the current setting values are same as
EEPROM.
Red background. black text: Possible to change settings and the current setting values are not same as EEPROM.
Gray background. black text. underline (Normal): Read-only items and the current setting values are same as EEPROM.
Green background. black text: Read-only items and the current setting values are not same as EEPROM.
