21
DMX
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
DEVICE SETTINGS (Settings)
Press MODE to access the device settings selection menu (--- Menu ---). Using the UP and DOWN
controls, select the menu item “Settings” (observe arrow) and confirm with ENTER.
---------------- Menu ----------------
DMX Address
DMX Mode
Stand Alone
Slave
Settings
System Info
This will take you to the sub-menu for configuring the following sub-menu items (see table, select
with UP and DOWN, confirm with ENTER, change value or status with UP and DOWN, confirm with
ENTER):
Settings
Wireless
Setting
= W-DMX settings
(wireless DMX)
W-DMX
on/off
On = W-DMX enabled
Off = W-DMX disabled
Operating
Mode
Receive = W-DMX module as receiver
Transmit = W-DMX module as
transmitter
Transmitting
Mode
G3 = G3 transmission standard
G4S = G4S transmission standard
Link
Link = pair with W-DMX devices. W-DMX
must be activated on all devices and the
pairing must be picked up by a transmit-
ter (Receive Reset).
Unlink = unpair all devices
Receive
Reset
No = do not retain transmitter pairing
Yes = retain transmitter pairing
Display
Reverse
= Flip display
On
Rotate display by 180° (e.g. for overhead
installation)
Off
No display rotation
Display
Backlight
= Display lighting
On
Permanent on
Off
Deactivation after approximately
1 minute of inactivity
DMX Fail
= Operating status with
DMX signal fault
Hold
Last command is retained
Blackout
Activates blackout
Emergency
Light
Spotlight changes to color macro
“Cold White”
