4
DEUTSCH
FRANCAIS
ESP
AÑOL
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
ENGLISH
IT
ALIANO
POLSKI
DEUTSCH
ENGLISH
5
DMX
DMX
CAUTION:
To reduce the risk of electric shock, do not remove cover (or back). There are no user serviceable parts
inside. Maintenance and repairs should be exclusively carried out by qualified service personnel.
The warning triangle with lightning symbol indicates dangerous uninsulated voltage inside the unit, which may cause an
electrical shock.
The warning triangle with exclamation mark indicates important operating and maintenance instructions.
Warning! The fog outlet nozzle becomes very hot during operation. Do not touch the outlet nozzle during operation and
maintain a minimum distance of 50 cm from it! Ensure that the device has cooled down completely before cleaning or
transporting it!
Warning! This device is designed for use below 2000 metres in altitude.
Warning! This product is not intended for use in tropical climates.
CAUTION! HIGH VOLUMES IN AUDIO PRODUCTS!
This device is meant for professional use. Therefore, commercial use of this equipment is subject to the respectively applicable national accident
prevention rules and regulations. As a manufacturer, Adam Hall is obligated to notify you formally about the existence of potential health risks.
Hearing damage due to high volume and prolonged exposure: When in use, this product is capable of producing high sound-pressure levels (SPL)
that can lead to irreversible hearing damage in performers, employees, and audience members. For this reason, avoid prolonged exposure to
volumes in excess of 90 dB.
CAUTION! IMPORTANT INFORMATION REGARDING FOG MACHINES!
1. This product has been developed for professional use in the field of event technology and is not intended for use in the home!
2. Use only Cameo fog fluid (water-based) and never add flammable liquid to the container!
3. Switch off the fog machine and disconnect it from the power supply before filling the container!
4. Operate the fog machine only in well-ventilated rooms!
5. Do not leave the fog machine running unattended!
6. The fog outlet nozzle becomes very hot during operation. Do not touch the outlet nozzle during operation and maintain a minimum
distance of 50cm from it! Ensure that the device has cooled down completely before cleaning or transporting it!
7. The fog mist emitted is very hot! Never direct the outlet nozzle towards people or animals! RISK OF BURNING!
8. If the fog machine is installed overhead, ensure that people or animals are not allowed directly underneath it! RISK OF BURNING!
9. Never direct the fog outlet nozzle towards open flames or flammable materials!
INTRODUCTION
LED FOG MACHINE
CLSW1000
CLSW2000
CONTROL FUNCTIONS
4-channel DMX control
Cable remote control
FEATURES CLSW1000
LED fog machine with 9 x 3 W single LEDs (3 x R, 3 x G, 3 x B). Effect similar to pyrotechnics. DMX-512 control. Simultaneous operation
via cable remote control. Cable remote control included. Overheating protection and warning when canister is empty. Rubber feet. Traverse
assembly at any angle. Safety screw eyelets. Operating voltage 230 V AC/50 Hz, power consumption 800 W.
CONNECTIONS, OPERATING AND DISPLAY ELEMENTS
1
POWER IN
IEC mains socket with built-in fuse holder. A suitable power cable is included.
IMPORTANT:
Replace the fuse only with a fuse of the same type and of the same value according to the stamp on the device! In the event
of repeated fuse failure, please contact an authorised service centre.
2
POWER
On / Off switch for power supply to the device.
3
REMOTE
5-pin XLR socket for connection of the cable remote control (included).
4
DMX IN
Male 3-pin XLR socket for connection to a DMX control device (e.g. DMX console).
5
DMX OUT
Female 3-pin XLR socket for sending the DMX and remote control signal.
6
LED DISPLAY
The four-digit LED display shows the operating status, mode and other system information.
7
CONTROL BUTTONS
MODE:
Selection of menu items. Move up one level in the menu structure.
ENTER:
Confirm value changes.
UP
and
DOWN:
Changing DMX address and settings.
2
6
7
1
3
5
4
FEATURES CLSW2000
LED fog machine with 12 x 10 W 4-in-1 RGBA LEDs. Effect similar to pyrotechnics. DMX-512 control. Simultaneous operation via cable
remote control. Cable remote control included. Overheating protection and warning when canister is empty. Rubber feet. Traverse assembly
at any angle. Safety screw eyelets. Operating voltage 230 V AC / 50 Hz, power consumption 1200W.
