Cameo
®
is a registered brand of the Adam Hall Group
Adam Hall GmbH | Adam-Hall-Str. 1 | 61267 Neu Anspach | Germany
Phone: +49 6081 9419-0 |
adamhall
.com
INSTALLATION INSTRUCTIONS
CLZW600SSBS SNAPBAG
®
(SOFTBOX FOR THE CAMEO ZENIT W600 SPOTLIGHT)
INTRODUCTION
The softbox, for even and soft lighting, is quick and easy to mount on
the spotlight.
INCLUDED
SNAPBAG
®
softbox, transport bag, magic cloth diffusor, half diffusor,
installation instructions
APPROPRIATE USE
The product is an accessory for event technology, as well as studio,
TV and broadcast! This product has been developed for professional
use in the field of event technology, studio, TV and broadcast. It
is not suitable for use in households! Furthermore, this product is
only intended for qualified users with specialist knowledge of event
technology, as well as studio, TV and broadcast! Use of the product
outside the specified technical data and operating conditions is con-
sidered inappropriate! Liability for damage and third-party damage
to persons and property due to inappropriate use is excluded!
SAFETY INSTRUCTIONS
1. Please read this manual carefully.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Use the softbox in the prescribed manner only.
5. The softbox may only be used with the Cameo Zenit W600 LED
spotlight.
6. Do not leave the product unattended while in use.
7. Intense heat, moisture, acidic and chemically aggressive sub-
stances can damage the product and lead to unsafe operation.
8. Due to its design, the softbox offers a large wind surface and is
therefore not safe in windy conditions. Only use the product when
there is no wind. If the wind starts to pick up, take the product out
of operation and store it in a wind-protected place.
9. The combination of the softbox with a spotlight changes the
system’s centre of gravity. This may create a risk of tipping.
Do not place the spotlight unsecured on a table edge or similar,
or else be sure to use a suitable stand.
CHOKING HAZARD! KEEP OUT OF THE REACH OF CHILDREN! THE
PRODUCT CONTAINS SMALL PARTS THAT CAN BE SWALLOWED
AS WELL AS PACKAGING MATERIAL THAT CAN BE SWALLOWED!
PLASTIC BAGS MUST BE KEPT OUT OF THE REACH OF CHILDREN!
MAINTENANCE AND CARE
1. Only clean the softbox by hand using lukewarm water and mild
soap. The softbox should not be machine washed. To dry, please
unfold completely and allow to air dry.
2. Please always ensure that you only pack and store the softbox
when it is completely dry. Permanent moisture can damage the
laminated structure.
3. After use, transport and store the softbox in the transport bag.
INSTALLATION
1. Remove the softbox from the transport bag and unfold it.
2. Place the softbox with the back and the two hook-and-loop
straps facing down in front of the light head of the spotlight (see
illustration) and stretch the two loops attached to the left and
right of the rear part of the softbox over the wing screws for the
tilt adjustment of the light head (A). Insert the two hook-and-loop
straps through the opening between the light head and the device
base (B).
3. Now pull the two hook-and-loop straps through the corresponding
eyelets on the upper edge of the rear part of the softbox, tension
the hook-and-loop straps slightly and then join the hook side and
the loop side of the corresponding straps together.
4. Now attach one of the included diffusor cloths (half diffusor or
magic cloth diffusor) to the front inner frame of the softbox using
the sewn-on hook-and-loop material.
Tip: For optimum balance and even light distribution, use the 100°
diffusor CLZW600SMLSD100 with the spotlight in addition to the
softbox.
C
3
1
B
A
2
