9
DMX
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
Linear
DMX value
Light intensity
Exponential
DMX value
Light intensity
Logarithmic
DMX value
Light intensity
S-curve
DMX value
Light intensity
Dimmer curves
SYSTEM INFORMATION (System Info)
To view various system information, press MODE until the top line of the display shows “Menu”. Now select the “System Info” option
(bottom line) using UP and DOWN and then press ENTER. Use the UP and DOWN buttons again to select the desired parameter, then press
ENTER to view the information or UP and DOWN to adjust (confirm with ENTER).
System info
Firmware
=
Displays the software version
V1.xx
Press ENTER to display information
Temperature
=
Displays the LED temperature in Celsius
or Fahrenheit
Temperature LED
Display temperature by pressing ENTER
Unit F/C
Displays the temperature in Celsius or Fahrenheit
Op.Hours
=
Displays the operating time in hours
xxxxh
Press ENTER to display information
IR REMOTE CONTROL (OPTIONAL)
Activate infrared remote control in system settings under “IR Remote” (IR Remote On) Now aim the infrared remote control
directly at the infrared sensor (line of sight) built into the front of the spotlight. The maximum range is approx. 8 meters.
Infrared remote control is deactivated in the DMX mode and slave mode.
BL / ON/OFF (Blackout)
The
BL
button switches off the LED, regardless of which operating mode is activated via the remote control. Press the
BL
button again to
reactivate the previously selected mode.
SP / SPEED
11-step speed adjustment for the operating modes “Auto Jump”, “Auto Fade”, and “Auto Program” First press the
SP
button and select the
desired speed by using the + and - buttons. Level 1 allows the color change sequence to progress slowly, pressing it again activates level 2
with a faster change sequence, and this is followed by levels 3 to 11, where level 11 is the fastest sequence of color changes.