8
DMX
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
SYSTEM SETTINGS (Settings)
Press MODE until the top line of the display shows “Menu”. Now select the “Settings” option (bottom line) using UP and DOWN and press
ENTER. You can now select the desired submenu item using UP and DOWN and confirm with ENTER (see table, status / change value with UP
and DOWN, confirm with ENTER):
Settings (bold = factory setting)
Display Rev
=
Display rotates by 180°
Display Rev On
Rotate display by 180°
(e.g. for overhead installation)
Display Rev Off
Normal display rotation
Display
=
Automatic display deactivation
Display On
Permanently on
Display Off
Automatic deactivation of the display after approx. 1
minute of inactivity
DMX Fail
=
Operating status if DMX signal
is lost
Hold
Last command is kept
Blackout
Activates blackout
Dim.Curve
=
Dimmer curve
Linear
Light intensity increases linearly with DMX value
Exp
Light intensity can be finely adjusted at lower DMX
values and broadly adjusted at higher DMX values
Log
Light intensity can be broadly adjusted at lower DMX
values and finely adjusted at higher DMX values
S-curve
Light intensity can be finely adjusted at lower and
higher DMX values and broadly adjusted at medium
DMX values
Dimmer
Resp.
=
Dimmer response
LED
The spotlight responds abruptly to changes in the
DMX value
Halogen
The spotlight behaves like
a halogen spotlight with soft brightness changes
Autolock
=
Automatically locks the control
elements
On
Automatically locks the control elements after approx.
1 minute of inactivity Display shows: "Locked!"
Unlock: Press UP and DOWN at the same time for
approx. 5 seconds
Off
Deactivates automatic locking of the control elements
White
Balance
=
White balance
Red, green, blue,
amber
Individual white balance. Cross-mode configuration of
the 4 colors RGBA (value 000–255)
IR Remote
=
Activate or deactivate control via
the IR remote
On
Activate control via the IR remote
Off
Deactivate control via the IR remote
Factory
Reset
=
Reset to factory settings
Reset Now?
ENTER = reset to factory settings
MODE = do not reset to factory settings