9
DMX
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
Settings
Display Backlight
=
Display
lighting
On
Off
Deactivation after approximately 1 minute of inactivity
DMX Fail
=
operating status
with DMX signal
fault
Hold
Last command is retained
Blackout
Activates blackout
Dimmer Curve
=
dimmer curve
Linear
Light intensity increases linearly with DMX value
Exponential
Light intensity can be finely adjusted at lower DMX values and broadly
adjusted at higher DMX values
Logarithmic
Light intensity can be broadly adjusted at lower DMX values and finely
adjusted at higher DMX values
S-Curve
Light intensity can be finely adjusted at lower and higher DMX values
and broadly adjusted at medium DMX values
Dimmer Response
=
dimmer response
LED
Lamp responds directly to changes in DMX value
Halogen
Lamp behaves like a halogen spotlight with delayed brightness chang-
es and without changes in colour
Redshift
(DTW)
Dim to Warm
=
accurately mimics
the colour drift
of dimming a
halogen spotlight.
When dimming
the spotlight, the
colour temper-
ature changes
automatically to
increasingly warm
white and amber
(and vice versa).
Off
Colour drift is disabled
On
Colour drift is enabled
For optimum halogen dimming characteristics, set the dimmer
response to Halogen and colour drift to On.
The Redshift function only affects the dimmer circuits, not the colour
channels, such as A, WW, CW.
White Balance
=
colour calibration
Amber, Cold
White, Warm
White
Individual colour calibration. Cross-mode brightness setting of the 3
LED groups A, CW and WW with values from 000 to 255
Autolock
=
automatic locking
of the controls
Off
Automatic locking of the controls is disabled
On
Automatic locking of the controls after approximately 1 minute of
inactivity. Display shows: “LOCKED"
To unlock: Press and hold UP and DOWN simultaneously
for approx. 3 seconds
Factory Reset
=
reset to factory
setting
Factory
Reset?
ENTER = Reset/MODE = Cancel
