Cameo OPUS SP5 PLUS, User Manual

Page: 17 / 154

17
DMX
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
Network
Network
Input Activate / deactivate
network input OFF Network input deactivated
ON Network input activated
Protocol Network protocol
ArtNET ArtNet Protocol
sACN sACN protocol
Address
Universe 1 - 256,
Set IP address and subnet mask
Universe
000 - 255
000 to 255. Change value with
LEFT and RIGHT, confirm with
ENTER.
IP Address
Select block with LEFT and RIGHT,
change value with UP and DOWN,
confirm with ENTER.
IP Subnet
Mask
Select block with LEFT and RIGHT,
change value with UP and DOWN,
confirm with ENTER.
DMX OUT
Output network signal
via DMX OUT
OFF Do not output signal
ON Output signal
W-DMX SETTINGS (Wireless)
Starting from the main display, press ENTER to enter the main menu. Use the and controls to
select the control menu Control and press ENTER. Use UP and DOWN to select the menu item
"Wireless" and confirm by pressing ENTER. For information on the W-DMX settings, please refer
to the table below. Confirm all changes to the settings with ENTER.
Wireless
W-DMX
OFF Deactivate W-DMX
ON Activate W-DMX
Operating
(currently in beta status) Receiver W-DMX module configured as receiver
Transmitter W-DMX module configured as transmitter
Transmitting
(currently in beta status)
G3 G3 transmission standard
G4s G4S transmission standard
Link
Link
Pair with W-DMX devices. W-DMX must be enabled
on all devices, and the pairing with a transmitter
must be reset (Receive Reset)
Unlink Unpair all devices
Receive Reset
NO Do not reset transmitter pairing
YES Reset transmitter pairing