12
DMX
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
Pan/Tilt
Configures the device head
Pan Reverse
OFF
Pan movement direction does not reverse
ON
Pan movement direction reverses
Tilt Reverse
OFF
Tilt movement direction does not reverse
ON
Tilt movement direction reverses
Pan Angle
630
Pan angle 630°
540
Pan angle 540°
Feedback
OFF
Automatic position correction deactivated
ON
Automatic position correction activated
B.O. Moving
Automatic blackout when
head moves
OFF
No blackout when head moves
ON
Blackout when head moves
Fan
Fan control
Head Fan
Auto
The fan speed will adjust automatically to the
temperature of the device head
Low
Consistently low fan speed with reduced
brightness, as required
Base Fan
Auto
The fan speed will adjust automatically to the
temperature of the device base
Low
Consistently low fan speed with reduced
brightness, as required
linear
DMX value
Light intensity
exponential
DMX value
Light intensity
logarithmic
DMX value
Light intensity
S-curve
DMX value
Light intensity
DIMMER CURVES
SERVICE MENU
Starting from the main display, press ENTER to go to the main menu. Use the UP and DOWN control keys to select the
Service
menu and
press ENTER.
This will take you to the submenu for adjusting the submenu options (select via UP and DOWN, confirm via ENTER, change value via LEFT
and RIGHT, confirm via ENTER).
Calibrate
- Calibrate the components with values of 000 to 255 (Password 050).
Test Manual
- Manually test the components with values of 000 to 255.
Reset Motor
- Reset the motors.
All
= All motors,
Pan&Tilt
= pan and tilt motors,
Head Only
= motors in device head.
USB Update
- Firmware update via USB interface.
OFF
= Stop firmware update via USB interface.
ON
= Allow firmware update via USB interface.
Factory Reset
- Reset to factory settings.
