Cameo iDMX T3, User Manual

Page: 15 / 32

ENGLISH
15
7 1 - 6 0 - 3 2 0 2 a r o r u A / a n u L X M R C
Mode CRMX receivers Older CRMX receivers W-DMX receivers
W-DMX G3
Yes Yes Yes
W-DMX G4S Yes No Yes
When operated as receivers, CRMX Aurora and CRMX Luna will automatically detect and link using the
protocol used by the transmitter at the time of linking.
Linking key
What is Linking Key
is what we call cloned transmitters .
It can also be used to link a receiver to a transmitter that has an active link using the same linking key.
This allows for easy addition of a receiver to a network where the transmitter might be inaccessible for
instance, without the need to initiate a linking process from the transmitter.
Cloning transmitters
By cloning transmitters, by entering the same Linking Key into both transmitters, you can place them
at separate physical locations and move receives between the locations without the need to relink.
Note: It is important that the transmitters are separated, otherwise receivers may end up creating a
Linking an RX by Linking Key
without the need for performing a linking procedure from the transmitter.
Enter the same Linking Key into the receiver as you have entered into the transmitter and the receiver
will automatically link to the transmitter when it is within range.
LumenRadio AB 10
iDMX T3