21
DMX
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
Settings
DMX Fail = Operational status
with DMX signal
fault
Hold
last command is retained
Blackout
Activates blackout
Full On
100% output
Dimmer
Curve
= Dimmer curve
Linear
Light intensity increases linearly with
DMX value
Exponential
Light intensity can be finely adjusted at
lower DMX values and broadly adjusted at
higher DMX values
Logarithmic
Light intensity can be broadly adjusted at
lower DMX values and finely adjusted at
higher DMX values
S-curve
Light intensity can be finely adjusted at
lower and higher DMX values and broadly
adjusted at medium DMX values.
Dimmer
Re-
sponse
= Dimmer response
LED
Light responds abruptly to
changes in DMX value
Halogen
Light behaves like a halogen spotlight
with slight brightness changes
PWM
Frequen-
cy
= Configuration of
PWM frequency
800 Hz/1200
Hz/2000 Hz/
3600 Hz/12
kHz/25 kHz
Calibra-
tion
= Sets maximum
brightness
White
Cross-mode brightness setting with
values from 000-255
SYSTEM SETTINGS (Settings)
Select
Settings
and confirm.
This will take you to the submenu for configuring the submenu items (see table):
Summary of Contents for H1 D
Page 175: ......
