14
DMX
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
Note on the main screen in operating modes with external control: When the control signal is
interrupted, the characters in the display start flashing; when the control signal is present again,
the flashing stops.
Warning message: If the warning symbol (triangle with exclamation mark) appears in the display,
there is an error in one or more components of the unit. The affected components can be viewed
in the
Info Menu
under
Error Info
. If the error cannot be rectified by a restart or reset, please
contact an authorised service centre.
W-DMX
™
To pair a W-DMX receiver with a W-DMX compatible transmitter, the
Reset
command must be
executed in the receiver menu under Connect (select Reset and confirm). The receiver is now in
pairing standby and waiting for a pairing request from a transmitter. Start the pairing process by
selecting
Link
in the menu of the transmitter and confirm; the devices are now paired automati-
cally. In the same way, several receivers can be paired simultaneously or one after the other to
a transmitter (e.g. for master/slave operation). A W-DMX connection is always maintained until it
is disconnected by means of the
Reset
command in the receiver or the
Unlink
command in the
transmitter, regardless of whether a device has been disconnected from the power supply in the
meantime.
W-DMX
™
STATUS
W-DMX
deactivated
W-DMX
activated as
receiver, not
paired
W-DMX
activated
as receiver
and paired,
transmitter is
switched off or
out of range
W-DMX
activated as
receiver and
paired, no DMX
signal
W-DMX
activated as
receiver and
paired, DMX
signal available
W-DMX
activated as
transmitter with
G3 standard,
DMX signal
available
W-DMX
activated as
transmitter with
G4s standard,
DMX signal
available
W-DMX
activated as
transmitter with
G3 standard, no
DMX signal
W-DMX activated as transmitter
with G4s standard, no DMX signal
