12
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
DMX
MANUAL LOCKING FUNCTION
In addition to the ability to protect the lamp automatically from accidental and unauthorised operation (see "Settings" - "Auto-lock"), the
controls can also be locked manually. Press and hold the UP and DOWN controls simultaneously for approximately 5 seconds. If an attempt
is made to change settings, "Locked!" will appear in the display and changing the lamp’s settings via the controls is no longer possible.
After approx. 1 minute, the current operating mode is displayed again. To unlock, press and hold the UP and DOWN controls simultaneously
for approximately 5 seconds.
The display will show the previously displayed information.
IR REMOTE CONTROL
BLAC K
OUT AUTO
SOUN D
STROBE
SPEED
SENS I
TIVITY
-
3
2
1
4
5
6
9
8
7
-
+
FADE
R
G
B
W
A
%
MANUAL
0
UV
Aim the infrared remote control directly at the infrared sensor on the front of the lamp. The maximum
range is approximately 8 metres. In DMX and Slave modes, the remote control is deactivated. Battery
for IR remote control = CR2025.
Blackout
The blackout button is used to switch off all LEDs, regard-
less of operating mode enabled via the remote control.
Press the blackout button again to reactivate the previously
selected mode.
Auto-programme
Auto-Programmes 1 - 6. Programme selection with
and
. Programme run speed with
and
and
. Brightness setting with
and
and
.
No function.
Strobe
Strobe light for AUTO, FADE and MANUAL operating modes.
Press
to activate. Strobe speed with
and
.
Press
to deactivate strobe.
Speed
Setting the running speed for Auto and Fade programmes.
No function.
Brightness
Press
and
and
to adjust brightness.
Manual colour mix
Press
and
,
,
or
to manually mix
colours. Adjust intensity with
and
.
SYSTEM INFORMATION (System Info)
Press MODE to access the device settings selection menu (--- Menu ---). Using the arrow keys, select the menu item "System Info"
(observe arrow) and confirm with ENTER.
------------------- Menu -------------------
Mode
Settings
System Info
Use the UP and DOWN controls to select the desired sub-menu item, and press ENTER to display the corresponding information.
System Info
Firmware
=
Displays device firmware
Main CPU
Vx.x
Temperature
=
Displays temperature of LED unit
LED Temp
xx°C / xx°F
Unit
°C (= display in degrees Celsius)
°F (= display in degrees Fahrenheit)
Operation Hours
=
Displays operating time
xx:xx h
Displays total operating time in hours and minutes
