10
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
DMX
COLOUR MACROS (Color Macro)
15 different preset colour macros are available. Select colour macro mode as per the procedure previously described in SETTING OPERATION
MODE and confirm with ENTER. Using the UP and DOWN controls, now select the desired colour preset (observe arrow) and confirm with ENTER
(Color Off = blackout). A three-digit figure is shown on the display and you can set the desired brightness on a scale from 000 to 1000 using UP
and DOWN. Confirm by pressing ENTER. Press MODE three times to return to the main display (Colour Macro Mode).
---------------- Mode ----------------
Auto
Static
Color Macro
Mode
Color Macro
------------ Color Macro ------------
Color Off
Red
<100>
Amber
<100>
Yellow Warm <100>
Yellow
<100>
Green
<100>
Turqoise
<100>
Cyan
<100>
Blue
<100>
Lavender
<100>
Mauve
<100>
Magenta
<100>
Pink
<100>
Warm White <100>
White
<100>
Cold White
<100>
USER PRESETS (User Color)
The operating mode “User Presets” allows the overall brightness and a colour mixture of R, G, B and W to be saved directly in the device in five
individual colour presets. Select the menu item “User Color” as described above in SETTING OPERATION MODE and confirm with ENTER. Now
use UP and DOWN to select presets Color1 to Color5, confirm with ENTER and select the submenu item you would like to edit (observe arrow).
Confirm by pressing ENTER. The display will show a three-digit number field and you can use the UP and DOWN controls to configure the value
between 000 and 255 as required. Confirm again with ENTER. Once all settings have been made according to preference, press MODE four
times to return to the main display (Mode User Color).
---------------- Mode ----------------
DMX
Slave
Auto
Static
Color Macro
User Color
Mode
User Color
------------ User Color ------------
Color1
Color2
Color3
Color4
Color5
------------ Color1 ------------
Dimmer
<255>
Red
<255>
Green
<255>
Blue
<255>
White
<255>
001
100
-
DEVICE SETTINGS (Settings)
Press MODE to access the device settings selection menu (--- Menu ---). Using the UP and DOWN controls, select the menu item “Settings”
(observe arrow) and confirm with ENTER.
---------------- Menu ----------------
DMX Address
Mode
Settings
This will take you to the sub-menu for configuring the following sub-menu items:
Settings
Runtime
= Increase battery life by up to 24 hours with
correspondingly reduced brightness
(calculated on full with 100% battery)
Off
Function deactivated
4 hours -
24 hours
Configure battery run time from 4
hours to 24 hours in 1 hour incre-
ments.
Display Reverse
= Flip display
On
Rotate display by 180° (e.g. for over-
head installation)
Off
No display rotation
Display Backlight
= Display lighting
On
on permanently
Off
Deactivation after approximately 1
minute of inactivity
DMX Fail
= Operating status with DMX signal fault
Hold
Last command is retained
Blackout
Activates blackout
Emergency Light
Lamp changes to colour macro “Cold
White”
