IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
7
DMX
Dimmer
000 - 255
Dimmer Fine
000 - 255
Strobe Func.
000 - 255
-
Mode
Static
Static
Dimmer
Static
Dimmer Fine
Static
Strobe Func.
ENTER
UP/DOWN
-
ENTER - UP/DOWN
ENTER - UP/DOWN
ENTER - UP/DOWN
ENTER
ENTER
ENTER
Menu
Mode
DMX Mode
03CH
ENTER
UP/DOWN
ENTER
ENTER
Mode
DMX
/
Mode
Sound
Mic Sens
00 -99
ENTER
UP/DOWN
/
Mode
Slave
ENTER
/
ENTER
SYSTEM SETTINGS (settings)
To access system settings, press the MODE button repeatedly until "Menu DMX Addr" or "Menu Mode" appears in the display. Now select
the menu item "Menu Settings" using the UP and DOWN keys and press ENTER. Now select the desired sub-menu item, but this time with
the buttons UP and DOWN and confirm with ENTER (see tables, note sub-menus).
Settings
Display Rev
= rotate display by
180°
Display Rev On
= rotate display by 180° (e.g. for overhead installation)
Display Rev Off
= normal orientation of the display
Display
= automatic display
shutdown
Display On
= permanently on
Display Off
= automatic display shutdown after approximately 1 minute of
inactivity.
DMXFail
= operating status
with DMX signal
fault
Hold
= last command is retained
Blackout
= activates blackout
Dim.Curve
= Dimmer curve
Linear
= light intensity increases linearly with DMX value
Exp
= light intensity can be finely adjusted at lower DMX values and
broadly adjusted at higher DMX values
Log
= light intensity can be broadly adjusted at lower DMX values and
finely adjusted at higher DMX values
S-Curve
= light intensity can be finely adjusted at lower and higher DMX
values and broadly adjusted at medium DMX values
Dimmer Resp.
= dimmer sensitivity
LED
= spotlight responds abruptly to changes in DMX value
Halogen
= spotlight behaves like a halogen spotlight with soft brightness
changes
IR Remote
= activate or deacti-
vate control by IR
remote control
On
= IR remote control activated
Off
= IR remote control deactivated
