8
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
DMX
INSTALLATION
Thanks to its integrated rubber feet, the spotlight can be positioned in a suitable location on the stage floor etc.
Installation on a traverse is possible using the two Omega brackets supplied (only use original accessories) together with the appropriate
traverse clamps (not included). Attach the device securely at the specified position using a suitable safety cable.
Important:
Overhead installation may only be carried out by qualified personnel.
Installation on a suitable tripod is possible using the integrated 35 mm tripod flange.
Advanced Settings
Reset
= Reset motors
Yes.
Reset pan and tilt motors
No
= Discontinue pan and tilt motor reset
Pan Invert
= Head1 pan direction
No
= No reversal of pan direction
Head2 pan direction
Head3 pan direction
Yes.
= Reversal of pan direction
Head4 pan direction
Tilt Invert
= Head1 tilt direction
No
= No reversal of tilt direction
Head2 tilt direction
Head3 tilt direction
Yes.
= Reversal of tilt direction
Head4 tilt direction
Display
= Display lighting
On
= Permanently on
Off
= Deactivation after one minute of inactivity
Display invert
= Rotate display
On
= Rotate display by 180°
(e.g. for overhead installation)
Off
= No display rotation
DMX Fail
= Operating status with
DMX signal fault
Auto
= Activates auto mode
Black
= Activates blackout
Hold
= Last command is retained
Software
= Display device software
ENTER
V1.x
Summary of Contents for CLHB4000RGBW
Page 63: ......
