7
DMX
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
ADVANCED SETTINGS
Press MENU to access the selection menu for system settings. Using the UP and DOWN controls, select the menu item “Advanced Settings”
(coloured background) and confirm with ENTER. This will take you to the submenu for setting the following submenu items (selection with
UP and DOWN, confirm with ENTER):
System Settings
DMX Address
001
DMX Mode
CH-14
Auto Mode
Auto06
Slave Mode
On
Advanced Settings
Advanced Settings
Reset No/Yes
Pan Invert
No/Yes
Tilt Invert
No/Yes
Display On/Off
Display Invert
No/Yes
DMX Fail Auto/Black/Hold
Software V1.x
Advanced Settings
Reset
=
Reset motors
Yes
= reset the pan & tilt motors
No
= cancel reset of pan & tilt motors
Pan Invert
=
pan direction
No
= do not reverse pan direction
Yes
= reverse pan direction
Tilt Invert
=
tilt direction
No
= do not reverse tilt direction
Yes
= reverse tilt direction
Display
=
Display lighting
On
= permanently on
Off
Deactivation after approximately 1 minute of inactivity
Display
Invert
=
Rotate display
No
= no display rotation
Yes
= rotate display by 180° (e.g. for overhead installation)
DMX Fail
=
Operating status with DMX
signal fault
Auto
= activates Auto mode
Black
= activates blackout
Hold
= last command is retained
Software
=
displays device software
V1.x
INSTALLATION AND MOUNTING
Thanks to its pre-installed rubber feet, the spotlight can be positioned in a suitable location on the stage floor etc. Mounting on a traverse
is achieved with the supplied Omega bracket (only use original accessories) and a suitable traverse clamp (not included). Secure the device
in the selected position with a suitable safety cable. To do this, attach the Omega bracket bolts to the base of the housing using a 5mm hex
tool and the two M6 hexagon bolts. Attach the supplied M6 securing lug to the left or right of the Omega bracket.
Important: Overhead mounting requires extensive experience, including the calculation of the load limit values of the installation material
and regular safety inspection of all installation materials and spotlights.
If you do not have these qualifications, do not attempt to perform an installation yourself. Refer instead to a qualified professional.
