11
DMX
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
DEVICE SETTINGS (Settings)
You can access the options menu by pressing MODE. Using the and control keys, now select the “Settings” menu option (dark back-
ground) and confirm with ENTER.
This will take you to the sub-menu for setting the following sub-menu options (select using and , confirm with ENTER, change the
value or status using and , and confirm with ENTER):
Settings (bold = factory setting)
Display
Rev
=
Flip Display
Off
Display does not rotate
On
Display rotates by 180° (e.g. when installed overhead)
Display
=
Display Backlight
Off
Deactivates after approx. 30 seconds of inactivity
On
Permanently on
DMX Fail
=
Operating mode for DMX
signal interruption
Hold
Last command is kept
Blackout
Activates blackout
DimCurve
=
Dimmer Curve
Linear
Light intensity increases linearly with DMX value
“Exp
(exponential)”
Light intensity can be finely adjusted at lower DMX values and
broadly adjusted at higher DMX values
“Log
(logarithmic)”
Light intensity can be broadly adjusted at lower DMX values
and finely adjusted at higher DMX values
S-curve
Light intensity can be finely adjusted at lower and higher DMX
values and broadly adjusted at medium DMX values
Pan Angle
=
Pan Angle
540
Pan angle 540°
630
Pan angle 630°
Pan Rev
=
Pan Reverse
Off
Pan movement direction does not reverse
On
Pan movement direction reverses
Tilt Rev
=
Tilt Reverse
Off
Tilt movement direction does not reverse
On
Tilt movement direction reverses
PWM freq
=
LED PWM Frequency
800 Hz
/ 1200
Hz / 2000 Hz /
3600 Hz / 12 kHz /
25 kHz
Sets the LED PWM frequency
Fan
=
Sets fan control
Auto
Automatic fan control
Silent
Extra quiet fan with reduced brightness, if required
Feedback
=
Position correction
On
Automatic position correction activated
Off
Automatic position correction deactivated
Mov
Blackout
=
Automatic blackout when
head moves
Off
No blackout when head moves
On
Blackout when head moves
Test
=
Function test
Off
Stops the function test
On
Step-by-step function test of the LED and all motors (pan, tilt,
gobo, etc.)
Factory
Reset
=
Reset to factory settings
Reset?
Reset to factory settings:
Confirm with ENTER, cancel with MODE
Reset
=
Reset the motors
Pan&Tilt
Reset the pan and tilt motors
Head
Reset all head motors (color wheel, gobo well, prism, etc.)
All
Reset all motors
