Pa
g
e
1111
- M
an
u
al
c
od
e
FA
0
0
13
5
-E
N
FA
0
0
13
5
-E
N
- ve
rs
.
22
- 0
1/2
0
17 - © C
am
e S
.p.
A
. -
The contents of this manual may be changed, at any time, and without notice.
Fit the arm skid into the slide rail
(see
).
Cut the slide rails to the required length, leaving a minimum clearance at the ends
.
One or two-leaf single-panel shutter
One or two-leaved jointed double-paneled shutter
The VLR08/VLR09 adjustable arms, allow you to adjust the leaf opening more accurately, by changing the joining holes of the
two semi-arms (see page 10, figure
).
Fit the guide to the shutter and
check that it is level and that the
skid slides smoothly.
Use the premarked holes and
use flat countersunk screws (not
issued).
The operation should be
performed with the transmission
arm fixed to the motor shaft.
