CAME SDN Series, Quick Start Manual

Page: 5 / 11

CAME Australia Pty Limited
Automatic Gates
– Access Control – Parking Equipment - Bollards
CAME Australia Pty Limited ABN 31 116 251 024
Unit 55, 11-21 Underwood Road, Homebush NSW 2140
T: (02) 9746 9991 F: (02) 9746 8891 W: www.came.com.au
ZLJ14 & 24
1. Insert all wires between motors and CB, Set limits on operators, Insert AF43S card
2. Connect lead to L and N, turn power on
3. To enter the MENU, press and hold < ENTER > for at least ONE SECOND
4. Scroll to LANGUAGE < ENTER > select ENGLISH < ENTER> ESC, ESC
5. Scroll to FUNCTIONS < ENTER >
6. Scroll to AUTOCLOSE < ENTER > select DISABLED < ENTER >
7. Scroll to TOTAL STOP < ENTER > select DISABLED < ENTER >
8. Scroll to CX < ENTER > select DISABLED < ENTER >
9. Scroll to CY < ENTER > select DISABLED < ENTER > (CZ disabled ex-factory) ESC , ESC
10. Scroll to IMP.RUN < ENTER > MOTOR TYPE < ENTER > set your motor < ENTER > ESC, ESC
11. Scroll to ENCODER < ENTER >
12. Scroll to SENSIB. RUN < ENTER > select half the dots < ENTER >
13. Scroll to SENSIB.DECEL< ENTER > select half the dots< ENTER >
14. Scroll to SET ENCODER < ENTER > select CONFIRM YES < ENTER > ESC, ESC
TO ADD USERS
15. Scroll to USER < ENTER >
16. Scroll to ADD USER < ENTER > scroll to ADD USER CONFIRM YES < ENTER > scroll to
RELATED FUNCTIONS < ENTER >
17. You can now press the Tx button
18. Repeat to add further users. Clone to add further remotes to each User slot.
ESC, ESC brings you back to the home screen of www.came.it (wait for 30 seconds to go out of
programming mode)
You can change the home screen by going to INFO < ENTER > scroll to STANDBY MSG. < ENTER >
insert new msg. < ENTER > hold for at least ONE SECOND