CAME Australia Pty Limited
Automatic Gates
– Access Control – Parking Equipment - Bollards
CAME Australia Pty Limited ABN 31 116 251 024
Unit 55, 11-21 Underwood Road, Homebush NSW 2140
T: (02) 9746 9991 F: (02) 9746 8891 W: www.came.com.au
BX 243 and BX 246 Commissioning
Factory default is a LHS installation with WHITE cam as OPEN and RED cam as CLOSED
1. Insert the AF43s card, attach the power lead to the L & N terminals and turn power on
2. Set Dipswitch 1 to OFF and Dipswitches 8, 9 & 10 to ON
3. Open the motor cover,
4. Disengage the clutch by pulling the lever out,
5. Close the gate fully and set the RED cam to the CLOSED position (always close onto the body of the
micro switch not to the spring)
6. Open the gate fully and set the WHITE cam to the OPEN position
7. Set all the pots to 50% except for gate run speed which is 100%
8. Press the red button and program in the first remote.
9. Re-engage the clutch, press remote and let it set up.
For BX 246
Follow steps 1 and 2 from the BX 243 setup
3. Open front door
4. Disengage the clutch by turning anticlockwise
5. Set limits on rack, re-engage clutch, close the door and lock securely
6. Run 2 complete cycles
7. Turn on dipsw 6
8. Press and hold Ch1 till the light goes solid
9. Turn off dipsw 6.
10. Ensure the front door is shut and locked at all times
To change from LH to RH install
Swap FA and FC plus M + N wires