Pa
g.
1
6
1
6
- M
an
u
al
c
od
e:
F
A
0
0
0
1
8
M
4
A
F
A
000
1
8
M
4
A
ve
r.
1
1
0
3
/2
0
15 ©
Ca
m
e S.
p.
A
.
Memorizing transmitters in sequential mode
-
Press a key on the MASTER transmitter. After 10 seconds,
the receiver's display will read Sto 1.
-
Select the output/outputs with keys 3 and 4.
-
Within 20 seconds, press a key on the transmitter you
want to memorize; the display will flash to show that
memorization has succeeded.
-
Repeat
❸
and
❹
for all transmitters you wish to add.
Legend of functions associated to the outputs
This table show which outputs have been selected according
to the alphanumeric value entered on display B.
Memorizing a second MASTER transmitter
You can memorize a second MASTER transmitter among
those you have already memorized in your receiver.
☞
If you repeat this procedure with another transmitter, this
will automatically replace the previous one.
-
Press a key on the transmitter that you want to memorize
as second MASTER transmitter. The display will show the
position occupied by the transmitter.
-
Set DIP switch 2 to ON. The display shows the first free
position and a flashing P.
-
Press 1 UP or 2 DOWN to select the position.
-
Press and keep pressed the key on the first MASTER
transmitter. The display will flash the position and the letter M.
-
Set DIP switch 2 to OFF.
Edit Password
You can edit the (123) default password with a combination
between 1 and 511.
-
Set DIP switches 1 and 2 to ON; The display shows 001
and C.
Press CLEAR; the display will flash 000 and C.
-
Press 1 (UP) or 2 (DOWN) to select the default password.
-
Press CLEAR; the display will flash 123 and C.
Within five seconds press button 4; the display flashes 000 and -.
-
Press 1 (UP) or 2 (DOWN) to setup a new password. Press
CLEAR; the display will flash M.
-
Set DIP switch 1 and 2 to OFF.
Saving data
You can save data on the Memory Roll.
⚠
Cut off the main power supply every time you connect or
disconnect the Memory Roll card.
-
Fit the Memory Roll card into the connector.
