CAME PXWRXU, Configuration Manual

Page: 21 / 48

Pa
ge
9
- M
an
ua
l
FA
00
772
-E
N
- v
er
s.
1
- 0
5/
20
17
- © C
am
e S
.p
.A
. - T
he d
at
a a
nd i
nf
or
m
at
io
n s
ho
w
n i
n t
hi
s m
an
ua
l a
re t
o b
e c
on
si
de
re
d s
ub
je
ct t
o c
ha
ng
e a
t a
ny t
im
e a
nd w
ith
ou
t t
he n
ee
d f
or a
ny a
dv
an
ce w
ar
ni
ng
.
[Entry time] (default: 20 seconds)
Adjusts the time between the alarm and the warning on the receiver.
The entry time is only set for delayed inputs and if the ON/OFF input is enabled
and active.
Entry time
[Backlight timeout] (default: 30 seconds)
Adjusts the time interval before the display backlighting is deactivated.
Backlight timeout
[Supervision time] (default: 5 hours)
Adjusts the regularity with which the signs of life message is sent by a learnt input
or siren. If there is no communication during this time, a supervision warning is
generated.
Supervision time
[Buzzer active] (default: YES)
It enables or disables the receiver button sound warnings.
Buzzer active
[Display contrast] (default: 60)
It allows you to adjust the display brightness (from 10 to 90 in intervals of 10).
Settings
Display contrast
[Show fault memory] (default: YES)
Enables or disables the fault memory view.
Show fault memory
[Show faults] (default: YES)
Enables or disables the fault view.
The fault may be related to the:
- TAMPER:
the tamper on at least one of the learnt devices (siren or inputs) is open;
- SUPERVISION: one of the learnt devices (siren or inputs) has not sent a transmis-
sion for longer than the supervision time;
- BATTERY:
the battery in at least one of the learnt devices (inputs, remote control
or siren) is flat;
- JAMMING: the receiver radio is not communicating correctly with the learnt de-
vices. There may have been a radio intrusion attempt.
These events are deleted only when the fault stops but remain visible in the [FAULT
MEMORY] . These are permanently deleted when changing the control unit status
from disconnected to engaged, or entering the user code and pressing one of the
buttons.
Show faults
[Show alarm memory] (default: YES)
Enables or disables the alarm memory view.
Show alarms