CAME MITHO, User Manual, Page: 97 / 148

97
User Guide
EN
38
37
4
5
35
36
3
Control of analogue outputs
Press button
4
to access the section dedicated
to the control of analogue outputs (for example,
proportional solenoid valves) .
The analogue outputs are usually programmed to
follow a preset operation cycle; to intervene on the
device programming proceed as follows .
Select the device and press button
5
.
The higher part of the screen displays 2 buttons
that allow to commute the operation from
Au-
tomatic to Manual .
In Automatic , mode, moving the cursor changes
the value of the output (valid until a new variation
in the system) .
In Manual mode, moving the cursor directly con-
trols the device, ignoring the programming that the
output had until that time .
Once the
Automatic mode is reset, the output
resumes functioning according to the system pro-
gram .
Press button 3 to consult a list of the measure-
ments that caused the activation of alarms or ac-
tions on the system .
THE COMFORT MENU
23-2-2009 16:12 Wind alarm
23-2-2009 16:07 Wind alarm
Pool valve Roses valve
Pool valve Roses valve
Pool valve Roses valve