CAME MITHO, User Manual, Page: 143 / 148

143
User Guide
EN
33
3
4
34
35
36
E
F
G
THE SETUP MENU
Select the button 3 to enable the possibility to
activate the anti-intrusion system by means of
preset scenarios .
Warning!
The activation of this function in control units that
do not include
scenarios will eliminate the option of
partially arming the anti-intrusion system.
Door entry setup
Select button 4 .
In systems with a porter switchboard, activating
the “
building ” function activates the “ Privacy ” and
“ Panic ” buttons on the main menu (see General
Information) .
Button 5 activates the automatic answer to the
intercommunicating calls coming from other ex-
tensions .
Activate the function “ MM ” synchronize the func-
tions of clock, date, voice mail, and privacy between
terminals connected with MM bus .
The “ manual prog. ” button is required for X1 and
300 type systems .
Button 6 lets you save the configuration of the
terminal in the removable memory card .
This operation is of considerable importance it you
need to update the firmware of the terminal or if
you want to transfer a configuration from one ter-
minal to another with the same call code .
The “ send sn ” button is needed to identify the de-
vice if it is being programmed from a PC .
The button 7 allows selection of the standard of
the video signal of the system, either PAL or NTSC .
Press the button
“PAL -> NTSC” to change from PAL
to NTSC . Press the button “NTSC -> PAL” to change
from NTSC to PAL .
building
send SN
manual prog
building
send SN
manual prog
PAL -> NTSC
PAL -> NTSC