CAME FA70230CB, Installation Manual, Page: 37 / 112

p.
9
- Manual
FA01335-EN
- 04/2019 - © C
AME S.p.A. - The cont
ents of this manual may change, at any time, and without notice. - Original instructions
INSTALLATION
The following illustrations are just examples, as the space available for fitting the operator and accessories varies depending on the area where it is
installed.
The drawings refer to the left-side gearmotor.
Preliminary operations
Set up the junction boxes and corrugated tubes you will need to make connections coming from the junction pit.
An operator (FA70230CB) and a gearmotor (FA70230) must be installed on two-leaf gates .
FA70230CB must be installed on the leaf that must start the opening maneuver first.
FA70230 must be installed on the leaf that must start the opening maneuver subsequently.
The number of tubes depends on the type of system and the accessories that are going to be fit.
Setting up the gearmotor
Carefully remove the gearmotor cover.
4
2
1
2
3