Page
25
- Manual
FA02036-EN
- 12/2023 - © C
AME S.p.A. - The contents of this manual may be changed at any time and without notice. - T
ranslation of the o
riginal instructions
Read data
Upload user data, timings and configurations to the memory device (memory roll).
The function is displayed only when a USB stick is inserted into the USB port or when a memory roll card is inserted into the control board.
F51
0 =Deactivated (Default)
1 = Activated
Transferring MASTER-SLAVE parameters
Enable sharing for the parameters programmed on the master gate with the slave gate.
This function appears only if the [RSE] function is active.
F52
OFF (Default)
ON
Opening direction
Set the gate opening direction.
F54
0 = To the left (default)
1 = To the right
CRP address
Assign a unique identification code (CRP address) to the control board. It is used where there are multiple operators connected via CRP.
F56
from 1 to 255
RSE speed
Set the remote connection system communication speed on the RSE port.
F63
0 = 1200 bps
1 = 2400 bps
2 = 4800 bps
3 = 9600 bps
4 = 14400 bps
5 = 19200 bps
6 = 38400 bps (default)
7 = 57600 bps
8 = 115200 bps
RIO ED T1
Associate one of the available functions with a wireless safety device.
F65
OFF (Default)
P0 = It stops the gate and excludes automatic closing. Use a control device to resume movement.
P7 = Reopen while closing.
P8 = Reclose while opening.
RIO ED T2
Associate one of the available functions with a wireless safety device.
F66
OFF (Default)
P0 = It stops the gate and excludes automatic closing. Use a control device to resume movement.
P7 = Reopen while closing.
P8 = Reclose while opening.
